1. Digital Pressure Gauge & Switch

This gauge provides a battery-powered, local display of pressure that is 6 times more accurate than its mechanical counter-part, with 3 times the over-range capacity and 5 to 10 times the resolution! The EPS version provides all this, PLUS 2 fully adjustable switches with low-voltage relay outputs for simple control and/or alarming.

2. "EM-Series" Sanitary Pressure Gauge

Improved version of our EB series 90mm gauge incorporating a more compact profile, and the industry's only externally adjustable standard span and offset.

3. "Mini" Sanitary Pressure Gauge

This gauge was developed to address the growing number of biopharmaceutical applications that require a smaller gauge dial and fractional sanitary fitting.

4. Sanitary Foundation Fieldbus Pressure Transmitter

The "FPP" series communicates digitally with a Foundation Fieldbus host device permitting configuration of parameters such as range, engineering units, tagging info, and other device specific information, from any accessible point in the network. Anderson's "FPP" series transmitters provide an abundance of information to improve predictive maintenance, plant safety, product quality, and regulatory compliance.

5. T-Series "Smart" Pressure Transmitter

The Anderson "T" series pressure transmitter is a microprocessor-based sensor specifically designed for sanitary fluid process applications in the pharmaceutical and biotechnology industries.

6. CPM - Clean Process Measurement Fittings

Sanitary pressure gauges and transmitters that can be installed on lines as small as 1/2" without the need for adapters or reducers, without creating pockets or "dead legs", and without sacrificing performance.

7. Pressure Gauges

This gauge has rapidly become the pressure gauge of choice for applications in the pharmaceutical and biotechnology industries.

8. IPS 200 Indicating Pressure Switch

This gauge offers user adjustable high and low setpoints and provides a separate solid state, ground closure switch for each.

9. RSV Pressure Transmitter

The Anderson RSV Pharmaceutical Series Pressure Transmitter offers not only a new low profile design, but may be ordered with built-in LCD indication.

10. Mini Pressure Transmitters

Anderson's newest sanitary pressure transmitter is specifically designed for critical measurements in fractional size lines. This product replaces the two piece fractional transmitter with a very compact, single piece transmitter.

11. Autoclaveable Pressure Transmitters

Anderson 's newest sanitary pressure transmitter improves upon the solid performance of the standard HA by allowing the device to be autoclaved in place. Improve enclosure integrity and tighter accuracy and stability will make this the transmitter of choice in both autoclave and critical applications.

1. Sanitary RTDs and Temperature Transmitters with Foundation Fieldbus Communications

Our newest electronic temperature sensors now feature Foundation Fieldbus communications capability in addition to the existing analog and HART "SMART" communication protocols.

2. Sanitary RTDs and Temperature Transmitters

Our electronic temperature sensors combine our industry proven all stainless steel construction with new modular components.

3. Thermowells

Sanitary Clamp Type, is designed for use with any 1/4" diameter probe having a 1/2" NPT threaded connector. The Sanitary Projectile Type is designed to be welded into process & storage vessels & accept a variety of sensors.

4. Digital Indicating Thermometers

This thermometer is a precision temperature monitor which incorporates a micro-based signal processor for optimum accuracy and performance.

Based on the proven design of the HM turbine meter, the HMP Turbine Flowmeter satisfies the specific design and performance requirements of Life Sciences applications. The HMP uses a bushing and shaft combination which makes the HMP suitable for intense sterilization processes and allows for steam blow down. The HMP is designed in accordance with the current ASME BPE flowmeter standard and is provided with necessary certifications and calibration documentation.

1. Liquid Level Transmitter (SX)

The Anderson Pharmaceutical Electronic Level Transmitter (SX) is designed to measure static head pressure in sanitary process and storage tanks.

2. LA "Top Mount" Level Transmitter

Based on our SX"Driftless" Transmitter, this top mount variation easily replaces problematic devices such as ball floats, pneumatics, capacitance probes and magneto-strictive sensors.

3. LN Potentiometric Level Transmitterr

A top mount insertion probe, the LN is designed with process control in mind. Ideal for filler bowls, balance tanks, and pressurized vessels, the LN is immune to pressure or temperature changes excelling in applications where pressure based sensors come up short.

4. HB Series "Mini" Level Transmitter

This sensor has been specifically designed for use in simple level control applications such as balance tanks and CIP Vessels. It is designed for harsh environments and stands up to direct wash-downs and wide variations in temperature.

5. Electronic Sanitary Differential Level Transmitter (TDL)

A fully electronic, differential pressure/level measurement system. It is designed to monitor levels in pressurized storage tanks, vacuum vessels, and surge tanks.

6. "LB" Point Level Probes for Conductive Liquid Applications

3-A approved sanitary point level. The LB provides up to four independent level points with probe lengths to 72". Paired with the "LL" switching module, the point level system allows choices of normally open or closed contacts and accommodates a broad variety of conductive media.

7. Conductivity-based, solid state Modules and Probes for on/off liquid level switching and alarming.

The typical Anderson conductance probe-type liquid level system consists of two major components, the switching "module" and a sanitary probe with one or more electrodes.

HC series toroidal conductivity sensor

The HC series toroidal conductivity sensor is specifically designed to be used on CIP systems to measure conductivity in cleaning solutions ranging from 0-200 up to 0-2,000,000 microSiemens/cm and temperature compensated over a range of 0° and 200°C. With its unique stainless steel housing and Teflon coated probe, these sensors are impervious to process coating or contamination. The sensors may be ordered with our model DA1, 1/4 DIN panel mount Analyzer or DA2, NEMA 4X Transmitter which may be panel, wall, pipe or integral sensor mounted.